System

Epoxy Coatings

This system is applied to suitable concrete floors where the substrate has been thoroughly prepared by means of dust extracted diamond grinding or closed-circuit vacuum shot blasting. This process removes any laitance and contaminants (new concrete) and provides a mechanical key for improved adhesion. 

Two coat water-based and high build epoxy systems are applied with or without an anti-slip finish. This is a cost-effective solution for areas where the floor requires suitable protection. Thickness – 500 microns.

Three coat high build epoxy systems are applied with or without an anti-slip finish. This is a more durable system when compared to the two coat alternative. It is suitable to apply in areas of high wear and has a good level of abrasion/chemical and excellent durability. Thickness – 750 microns.

Both of these systems are applied by roller and brush and provide our clients with a low odour and seamless floor. The level of anti-slip finish applied can be varied to suit the clients requirement to balance slip resistance with ease of cleanability.

Why work with Surface Systems?

As a long-established specialist industrial flooring company, we have the skill and experience to ensure your floor will perform as expected. This requires careful product sourcing and effective consultation to discover your business needs. We have access to products from a wide range of top suppliers of Epoxy Coatings so are not tied to a specific system.

Deciding on the type of finish you want is also important, especially if your flooring is in a public area.

With experience of installing Epoxy Coatings for a wide range of clients, Surface Systems are your regional specialists for commercial and industrial flooring.

For more information on Epoxy Coatings or to arrange a site visit, please call 01803 868680 or email enquiries@surfacesystems.co.uk